Stanley SGC-8000N Original Instructions Manual page 8

G
B
ASSEMBLY
Following the assembly directions below, you
will assemble the plate compactor in a few
minutes.
Handle
Mount the handle to the chassis with the M10X95
bolt, washers and nut.
M10 X 95 X 1
1. Turn over the lower handle.
SGC-8000N
2. Mount the upper handle to the lower handle with
2 M8X60 bolts, washers and nuts.
Throttle Control
A
Fix the throttle control to the upper handle as
shown.
Folding Wheels Kit
8
M8 X 60 X2
X2
X2
B
C