Intended use Safety of others Your STANLEY FATMAX SFMCE520 Inflation station has been designed to be used in most vehicles from the standard The appliance is not to be used by 12 Volt socket to inflate car and bike tyres, balls, rafts, air mat- tresses, swimming pool floats, etc.
ENGLISH (Original instructions) damaged or defective. modifications to the inflator or its Never attempt to remove or replace attachments. any parts other than those specified in Operate only with the accessories in- this manual. cluded or air handling parts acceptable for not less than 160 psi.
Page 5
This tool includes some or all of the following features. 1. Main power switch Chargers 2. Mode power switch 3. Digital readout Use your STANLEY FATMAX charger 4. Pressure setting buttons 5. Pressure mode/reset button only to charge the battery in the tool 6. Handle with which it was supplied.
Page 6
ENGLISH (Original instructions) Note: The compatible charger(s) will not charge a faulty 12. High volume pump inflator connection 13. 230V AC cord battery pack. The charger will indicate a faulty battery pack by 14. 12V DC vehicle adapter refusing to light. 15.
Page 7
(Original instructions) ENGLISH Fitting the Accessories digital readout will turn on and the inflator is ready for use. Before switching your inflator on, decide which power Universal Valve Adapter (Fig. D) source you will be using; 12V AC adapter, 230V AC plug or a 18V Max* battery pack.
Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 810 Whitehorse Road Box Hill VIC 3128, Australia Maintenance Your STANLEY FATMAX corded and cordless appliance has been designed to operate over a long period of time with a N717290 REV01...