Removal And Replacement Procedures For Authorized Service Provider Parts; Component Replacement Procedures; Bottom Cover - HP Pavilion 14 Series Maintenance And Service Manual

Hide thumbs Also See for Pavilion 14 Series:
Table of Contents

Advertisement

5
Removal and replacement procedures for
Authorized Service Provider parts
This chapter provides removal and replacement procedures for Authorized Service Provider only parts.
CAUTION:
Components described in this chapter should only be accessed by an authorized service provider.
Accessing these parts can damage the computer or void the warranty.
CAUTION:
Only HP authorized service providers should perform the removal and replacement procedures
described here. Accessing the internal part could damage the computer or void the warranty.

Component replacement procedures

NOTE:
Details about your computer, including model, serial number, product key, and length of warranty, are
on the service tag at the bottom of your computer. See
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow
the on-screen instructions.
There are as many as 54 screws that must be removed, replaced, and/or loosened when servicing Authorized
Service Provider only parts. Make special note of each screw size and location during removal and replacement.

Bottom cover

Table 5-1
Bottom cover description and spare part number information
Description
In luminous green finish
In natural silver finish
In plum mauve finish
In rose gold finish
Before removing the bottom cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
Remove the bottom cover:
1.
Remove the two rubber feet (1).
The rubber feet are available in the Rubber Foot Kits, using the following spare part numbers:
Labels on page 21
for details.
Component replacement procedures
Spare part number
L51750-001
L19170-001
L51749-001
L19171-001
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents