Sony MDS-SP55 Operating Instructions Manual page 40

Connecting digital components
(continued)
To the audio output of a digital component
Tuner
MD deck
To the digital optical output of a digital
component
40
1
Connect an optical cable (square optical
connector, not supplied).
AUX
IN 2
3 Connect the cable to the
digital optical output of a
digital component.
2
Connect audio cords (not supplied).
Connect the cords to the audio
output of a digital component.
Tip
Switch the function to "AUX" when listening to or
recording the sound of connected components.
1 Take the cap off the
DIGITAL OPTICAL
AUX IN.
AUX
2 Connect an
optical cable.
IN 2