Table of Contents
Advertisement
1,4 1,2,3
1
Press MENU/NO during recording
pause to display "MD Setup ?", then
press ENTER/YES.
2
Turn l/L until "MD T.Mark
Off" (or "MD T.Mark LSync") appears,
then press ENTER/YES.
3
Turn l/L until "MD T.Mark
LSync" appears, then press ENTER/
YES.
"LEVEL-SYNC" lights up.
4
Press MENU/NO.
Cancelling automatic track
marking
1 Press MENU/NO during recording pause.
"MD Setup ?" appears, then press ENTER/
YES.
2 Turn l/L until "MD T.Mark LSync"
appears, then press ENTER/YES.
3 Turn l/L until "MD T.Mark Off"
appears, then press ENTER/YES.
"LEVEL-SYNC" disappears.
4 Press MENU/NO.
When "LEVEL-SYNC" is off, a track number is
marked only at the beginning of each recording.
Marking track numbers at a
specific point during
recording
You can mark track numbers at any time during
recording, regardless of the type of sound source.
2,3
, Press z REC on the MD deck during
— Track Mark
z REC
recording at the point you want to add a
track mark.
The tracks following the added one are
renumbered.
25
Advertisement
Table of Contents
