Table of Contents
Advertisement
Labelling an MD (continued)
6
Repeat steps 3 to 5 to complete the
entire title.
If you made a mistake
Press CURSORT or t until the character
you want to change flashes, then repeat steps
3 to 5.
To erase a character
Press CURSORT or t until the character
you want to erase flashes, then press
CLEAR.
7
Press ENTER/YES to complete the
labelling procedure.
The titles you labelled appear sequentially.
To cancel labelling
Press MENU/NO before completing the
procedure.
Tip
You can label a track title during play. The playing
repeats until you finish labelling.
Note
If the MD is record protected, "C11" and "Protected"
appear alternately and the MD cannot be edited.
Remove the MD, then slide the record protection tab
to the closed position (see page 11).
Checking the titles
To check the disc titles, press SCROLL in stop
mode. To check the track title, press SCROLL
during play.
The title appears scrolling in the display. To stop
scrolling, press SCROLL. Press the button again
to resume scrolling.
30
Erasing the titles
To erase the disc titles and all
track titles at once
1 Press MENU/NO in stop mode.
2 Press . or > repeatedly until "MD
Name ?" appears, then press ENTER/YES.
3 Press . or > repeatedly until "MD Nm
Erase?" appears.
4 Press . or > repeatedly until "MD Nm
All Ers?" appears, then press ENTER/YES.
"MD Nm All Ers??" appears.
5 Press ENTER/YES.
"MD Complete!!" appears, and the disc title
and all track titles are erased.
To erase a disc title or a track
title
Do steps 1 to 3 of "To erase the disc titles and all
track titles at once".
While "MD Nm Erase?" is displayed, press
ENTER/YES so that "MD Nm Ers Disc" appears.
Press . or > repeatedly until the disc title or
the track number with the title you want to erase
appears, then press ENTER/YES.
"MD Complete!!" appears, and the disc title or the
track title is erased.
To cancel erasing
Press MENU/NO before completing the
procedure.
To return to the condition before
labelling or erasing
You can return to the original condition
immediately after labelling or erasing a title by
using the Undo function (see page 38).
Advertisement
Table of Contents
