Table of Contents
Advertisement
Combining recorded tracks
(continued)
To cancel combining
Press MENU/NO before completing the
procedure.
To return to the condition before
Combine
You can return to the original condition
immediately after combining the tracks by using
the Undo function (see this page). You can also
return to the original condition by using the
Divide function (see page 35).
Notes
• If both of the combined tracks have track titles, the
title of the second track is erased.
• If "Impossible" appears, the tracks cannot be
combined. This happens when you have edited the
same track many times. This is due to a technical
limitation of the MD system and is not a mechanical
error.
38
Undoing the last edit
— Undo Function
You can use this function to cancel the last edit
and restore the contents of the MD to the
condition before the edit.
Note, however, that you cannot undo an edit if you
do any of the following after the edit:
• Do another edit.
• Press the z REC or CD SYNC REC button.
• Update the TOC by turning off the system or
ejecting the MD.
• Disconnect the mains lead.
1
2
1
Press MENU/NO in stop mode to
display "MD Edit Menu".
2
Press . or > repeatedly until
"MD Undo ?" appears.
"MD Undo ?" does not appear, when there is
no editing function that can be cancelled.
`/1
3,4
2
Advertisement
Table of Contents
