Advertisement
key). The distance measuring key is active in both levels. The functionality
D
of the direction keys depends on the software used.
GB
Transmitting the measurement
F
If your software supports the direction keys use them to select the appro-
I
priate position for the cursor.
E
Press the
button briefly to transfer the value from the summary row
P
to the pocket PC / PC.
NL
For further details please consult your manual for the software used.
CN
Selecting particular values in the display
The display shows a number of measurements (min., max., last measu-
rement taken). By pressing and holding the
measurements in the display for transmitting (blue lines under the measu-
rements). When you press the
one specific value. Once selected the measurement can be transmitted
using the
- key. The same selection process can be used for areas,
volumes, indirect measurements and room dimensions.
During data transmission
If the data is not confirmed as being successfully received by the Pocket PC/
PC then no new measurement can be processed. The Info code "240"
appears in the display if no data transmission has taken place after 2
seconds. Press the
transmit it.
If Bluetooth transmission is limited, the PC may have Bluetooth
hardware with a shorter range. In this case we recommend the usage of an
external Bluetooth USB adapter of class 2.
Appendix
button you can select all
- key or the
- key you can select
- key and repeat the measurement and then
The free software supplied is designed to provide the user with
basic functionality. Leica Geosystems provides no warranty for this free
software and offers no support for it. Leica Geosystems accepts no liability
whatsoever arising from the use of the free software and is not obliged to
provide corrections nor to develop updates or upgrades.
You can find numerous commercial vendors of software for a wide range
of applications on our homepage.
Appendix
Message codes
All message codes are displayed with either
errors can be corrected:
Cause
156
Transverse tilt greater than 10° Hold the instrument without
162
The calibration has not been
accomplished on a levelled
surface and the calibration value
is respecitvely within an
ineligible area.
204
Calculation error
240
Data transfer error
245
2nd button pressed although no
Bluetooth connection exists.
252
Temperature too high
253
Temperature too low
255
Receiver signal too weak,
measurement time too long,
distance > 100 m
256
Received signal too strong
257
Wrong measurement,
background brightness too high
260
Laser beam interrupted
16
or "Error". The following
Remedy
any transverse tilt
Calibrate the device on an abso-
lute horizontal levelled surface.
Repeat procedure
Repeat procedure
Establish Bluetooth connection
Cool down instrument
Warm up instrument
Use target plate
Target too reflective (use target
plate)
Darken target (measure in diffe-
rent lighting conditions)
Repeat measurement
Leica DISTO™ D8 LCA782205a gb
Hide quick links:
Advertisement
