Frequently Asked Questions (FAQs)
Leica DISTO™ D810 touch
▪
How many zoom levels does the Leica DISTO™ D810 touch have?
The integrated digital Pointfinder in the device has an overview camera and additional 1x, 2x and 4x zoom.
You can see in the middle of the status bar of the screen, which zoom level you have selected. To change
from one zoom level to the next one you have to press the "up/down arrow keys" or you zoom in on the
touchscreen as you are used on mobile phones.
▪
Can I take photos with the Leica DIST0™ D810 touch and what is the resolution?
Yes, it is possible to take photos and screenshots. The photos taken have a resolution of 800 x 600 pixels
and screenshots have a resolution of 240 x 400 pixels. The photos and screenshots are save in jpg format.
▪
How can I download my photos from the Leica DIST0™ D810 touch to a computer?
Photos and screenshots can be downloaded to a computer via USB interface. The DISTO™ will be
automatically connected (plug and play). It is now possible to download data from the DISTO™ by using of a
file manager like the Windows Explorer.
Please note: It is not possible to upload data to the DISTO™ and it is not possible to delete files from the
computer. Deleting files must be directly done in the DISTO™ Gallery function.
▪
Can the brightness in the digital Pointfinder be adjusted?
Yes, when turning the digital Poinfinder on it is indicated in the display that you can change the brightness
with the left and right arrow keys on the keypad.
▪
Why is the laser dot on distance on short distances not centred in the crosshair?
It is the parallax effect due to the distance between the laser window and the digital Pointfinder optics. This
effect occurs only when the digital Pointfinder is used on targets below 10m.
In this case the laser dot appears displaced in reference to the crosshair. This is not an error !
For distances below 10m please rely on the real laser dot.
▪
How accurate is the tilt sensor in the Leica DISTO™ D810 touch?
The accuracy of the tilt sensor in the device is ±0.1° to the housing of the device. To the laser beam the
maximum deviation can be up to -0.1° and +0.2°. This applies at room temperature (20°C - 30°C). At any
other temperatures the maximum deviation increases by ±0.1°.
▪
What units of tilts are integrated into the Leica DISTO™ D810 touch?
You can set the DISTO™ D810 touch to use different tilt units. Select in the settings "Units inclination" and
choose between ° , %, in/ft and mm/m.
-> The level function in the right hand top corner of the display can also be switched on/off in the settings
"level". It is always set to 0.0° and cannot be changed into a different unit for tilts.
FAQ Leica DISTO D810 touch_en
Page 1 of 8