Advertisement
Press and hold the
D
measurement, for example the inclination angle
GB
and the indirect height
F
See drawing {M}.
I
Double tilt measurement with one measured distance
This procedure is particularly helpful if one target point of those to be
E
measured cannot be reflective. The second target point can be simply
P
pointed at with the digital viewfinder. In this measurement it is the angle
NL
only and not the distance that is measured and therefore no special target
is required for the laser. See drawing {S}.
CN
Press the
button three times. The following symbol
the display.
Press the
button - tilt and distance are measured. If the tilt changes,
the device updates the resulting height value and displays it in the summary
row.
Press the
button -
resulting indirect height is frozen in the summary row
Press and hold the
button to display additional information about the
measurement, such as the horizontal distance
second measured point
note the different icons).
Double tilt measurement with two measured distances
This procedure is particularly suitable if the two measured points do not
lie in the same vertical plane. The two target points are each measured
using a distance and a tilt measurement. See drawing {T}.
Press the
button four times. The following symbol
the display.
Functions
key to display additional information about the
, the measured distance
.
only the tilt is measured and the value of the
, the distance to the
, or the height to the same point
Press the button
Press the button
row shows the resulting distance between the two measured points
Press and hold the
measurement, such as the horizontal distance
between the measured points
Measure to the top target point first. This point must lie behind the
bottom target point. If this is not the case, an error message appears in the
display.
Profile measurement
appears in
This function is used to measure profiles and terrain sections. After measu-
ring a reference point with a known height (e.g. bench mark or floor), the
height and horizontal distance to the instrument are displayed for each
following point.
We recommend using a tripod!
Press the
.
The following symbol appears on the display:
With
and
4,000 m in a construction system) and confirm with
(please
symbol then appears on the display:
Now aim the instrument at the height reference point and press the
key - the gradient and distance are measured. The instrument is then ready
to measure profile points
Measure the profile points by pressing the
distance from the instrument to the measured point
appears in
of the point
Press
to exit the function.
14
-
tilt and distance are measured.
-
tilt and distance are measured. The summary
button to display additional information about the
, or the included angle
key five times.
enter the known height of the reference point (e.g. -
.
.
are displayed.
Leica DISTO™ D8 LCA782205a gb
.
, the height difference
.
.
. The following
key. The horizontal
and the height
Hide quick links:
Advertisement
