Advertisement
D
Offset (
)
GB
An offset adds or subtracts a specified value automatically to or from all
measurements. This function allows tolerances to be taken into account
F
(e.g. unfinished dimensions compared with finished dimensions). If you
I
selected the Offset function in the menu, you can now adjust the value
using the
or the
E
rate of change of the values. When you reach the desired offset value,
P
confirm it with the
NL
for as long as the offset value is set.
or
CN
Digital pointfinder image black / white (
The display in pointfinder mode can be changed to black / white.
Level in status field (
The Level (in °) in status field can be switched on or off.
Reset - returning the instrument to the factory
settings (
)
The instrument has a Reset function. If you select the menu function Reset
and confirm, the device returns to the factory settings and stack and
memory are deleted.
All customised settings and stored values are also lost.
Calibrate the tilt sensor (
You can calibrate the tilt sensor in the device. Calibration requires two
measurements on a level surface.
Select calibration mode in the menu
Menu functions
key. Pressing the key for longer increases the
key. The display shows the appropriate symbol
)
)
.
1
Carry out a first measurement
confirms the measurement with
2
Rotate the device horizontally through 180°
3
Press the
key and confirm that the device was rotated through
180°.
4
Press the
key and take the second measurement. The device
confirms the measurement with
The tilt sensor is calibrated.
)
8
on a level surface. The device
.
.
.
Leica DISTO™ D8 LCA782205a gb
Hide quick links:
Advertisement
