Table of Contents
Advertisement
Using the Features
5.3 Extending Lift Bar
Grasp the lift bar to move and guide the chair as you glide it
down stairs, carry it up stairs or over obstacles, and roll it.
The lift bar adjusts to five locked positions (Figure 14, Left).
Adjust the height according to operator preference and the
task or situation at hand.
EXTENDING AND RETRACTING THE LIFT BAR
1.
With one hand, squeeze the lift-bar release tabs
together and with the other hand grasp the lift bar and
raise or lower it (Figure 14, Inset).
2.
Verify that the lift bar is locked by trying to raise or
lower it without squeezing the release tabs. When the
lock is engaged the lift bar will not move.
5.4 Telescoping Lift Handles
The telescoping lift handles can be adjusted to five locked
lifting positions (Figure 15, Right). Adjust the handles
according to operator preference and the task at hand.
EXTENDING AND RETRACTING
THE LIFT HANDLES
1.
Press the release button (Figure 15, Inset) and push or
pull the handle until it is near the stop point desired.
2.
Release the button and slide the handle a little forward
or backward until it locks into the stop point.
3.
Verify that both handles are locked by trying to push or
pull them without pressing the release buttons. When
the locks are engaged, the handles will not move.
14
59, 59-T EZ Glide®
Figure 14 - Left: Lift-Bar Positions
Inset: Adjusting Lift- Bar Height
1
2
Figure 15 - Right: Lift-Handle Positions
Inset: Extending/Retracting a Lift Handle
© Ferno-Washington, Inc 234-3298-02 May 2009
2
1
Advertisement
Table of Contents
