Correcting Timecode Errors After The Power Has Been Turned Off - Zoom F4 Supplementary Manual

Correcting timecode errors after the power has been turned off

When the mode of Start TC is set to RTC, turning the power off lowers the timecode precision, but this function can improve the
error to the value close to 0.2 ppm when the power has been turned off.
1.
Press m.
2.
Use e to select
TIMECODE
, and press E.
(TC)
3.
Use e to select
Start TC
and press E.
Setting how timecode is initialized at startup
4.
Use e to select
RTC TC
, and press E.
Calibration
,
5.
Use e to select
Recalib.
and press E.
6.
Use e to select
Yes
press E.
F
Multi Track Field Recorder
,
, and
17