■ Insert a microSD card
After turning the power off, open the microSD card slot cover and
insert a card.
To remove a microSD card, push it further into the slot and then
pull it out.
NOTE
• Always make certain that the power is off when inserting or removing a microSD card.
Inserting or removing a card while the power is on could result in data loss.
• When inserting a microSD card, be sure to insert the correct end with the top side up as
shown.
• Recording and playback are not possible when a microSD card is not loaded.
• Use F2 Editor to format microSD cards.
Turning the power on
1.
Set
to ON.
2.
To turn the power off, set
HINT
Setting
Connecting the lavalier mic
1.
Attach the windscreen and the clip to the lavalier mic.
2.
Connect the lavalier mic to the INPUT jack, and tighten the screw lock.
Pass the cable through the
slot in the lavalier mic clip
before use.
to OFF.
to HOLD will disable button operations.
Lavalier mic
Windscreen
Mic clip
6
microSD card
INPUT jack