Zoom F4 Supplementary Manual page 16

Setting signals sent to the output jacks (Routing)
Setting signals sent to the SUB OUT
4.
Use e to select SUB OUT
Routing, and press E.
5.
Use e to select the track for SUB OUT 1 or SUB
OUT 2 routing and press E.
Press to cycle through settings
• Change tracks 1–6 to postfader (cancel others)
• Change L/R tracks to postfader (cancel others)
• Chamge track U1-U4 to postfader (cancel other) (cancel MS)
Press again to set tracks 1–6 to prefader
HINT
E
Press to cycle through the options:
→
Prefader Postfader
16
Prefader selected
Postfader selected
Off
Tracks routed to SUB OUT 1
Tracks routed to SUB OUT 2
Clear all settings
→
Off.
(continued)
NOTE
• Tracks 1–6 can be set to Prefader or Postfader.
• L/R tracks and tracks U1-U4 can only be set to Postfader.
• The 1-6, L/R and U1-U4 tracks cannot be selected at the
same time. Selecting one type will deselect the other.
6.
Press m.