Input Limiter - Zoom F4 Supplementary Manual

Input limiter

In Version 3.0, advanced limiter was added. The limiter can prevent distortion by controlling input signals that have excessively
high levels.
Input signal
Level
Threshold
Signal after
limiter
Attack
time
When the limiter is ON, if the input signal level exceeds the
set threshold value, the signal level will be suppressed to pre-
vent the sound from distorting.
The amount of time after the input signal exceeds the thresh-
old until compression of the output signal is maximized is
called the "attack time" . The amount of time after the input
signal goes below the threshold until the limiter stops com-
pressing the signal is called the "release time" . You can change
these two parameters to adjust the sound quality.
HINT
The F has a newly designed limiter that provides 10 dB of
headroom, allowing signals to be kept well below the set threshold,
therefore more effectively preventing distortion.
1. Press m.
Release Time
time
2.
Use eto select
INPUT
and press E .
3.
Use e to select
Input
, and press E .
Limiter
4.
Use e to select the input,
and press E .
HINT
ALL
Select to set all the inputs at the same time.
F
Multi Track Field Recorder
,
05