Table of Contents
Advertisement
6.
Disassembly &
Changing to new Half-Cabinet
•
LED MODULE
BRACKET SUB
Front Service
※ New cabinet must be changed after conduct Dehumidifying mode Aging. (Refer to page 100)
⑦ Remove Cover corner from Buffer Cabinet laid on the floor and lift up
half-cabinet with absorber attached. Remove the Half-Cabinets and
insert them between edge protection and connect cables of ⑦.
+
★Caution★
⑧ Put new half-cabinet with into the edge protection and lock with
magnet jig. Pull out edge protection after locked
⑨ Push back moved Half-cabinets and assemble Cover PCB and bezel.
Be careful not to damage module
Location of magnet locking
Remove absorbers and edge
protection
Samsung Electronics
Hide quick links:
Advertisement
Table of Contents
