2. Check Point about the Radiant Heat
◇ Ventilation Guide
Standard and condition for indoor installation
- Standard for using 'SAMSUNG WALL MOUNT' (Fulfill ADA)
∙ The gap between the front of a product and a wall: 98.6mm
∙ The gap between the back of a product and a wall: 26.1mm
- When sunlight enters
∙ If a sunlight enters through a window or outside walls of a building,
an additional inquiry is needed.
- The effect of warm/cold air from a duct system
∙ Make sure the warm/cold breeze(especially warm air) from a duct system not to affect a product.
- The measuring location for ambient temperature
∙ Either right in the center of a product or Air inlet part
※ Written under 'Full white, (back light 7)' standard
Written under 'Video, (back light 10)' standard
※ ADA(American's with Disabilities Act
Samsung Electronics
98.6mm
Measuring
location for
ambient
temperature
Measuring
location for
ambient
temperature
26.1mm
9