Table of Contents
Advertisement
3. Preparation for Cabinet Installation
Samsung Electronics
◈ Reference : Process of Screen check
TOGGLE SWITCH
SWITCH
POWER INLET
POWER OUTLET
TOGGLE SWITCH
화면 검사 사진 확인
Check the picture of the screen
◈ Internal white pattern
1. After turn on power, press the toggle swtich button for five seconds
2. Dehumidification screen comes out, push the toggle swtich twice
3. when the white screen is displayed, check the defective LED by sequentially pressing toggle switch
* Do not turn on the white pattern over 10 seconds before dehumidification
4. if you need more brighter pattern, push 'toggle switch' button for five seconds in white pattern
5. push toggle switch for 5 seconds again to exit factory OSD
18
Hide quick links:
Advertisement
Table of Contents
