Adjusting The Sound Characteristics; Changing The Bbe Mp Setting - Sony CDX-F7705X Operating Instructions (English, Español, Français) Operating Instructions Manual

Fm/am compact disc player
Hide thumbs Also See for CDX-F7705X Operating Instructions (English, Español, Français):
Table of Contents

Advertisement

Available languages

Available languages

When an MP3 file is played, you can select an
album using the rotary commander.
(With this unit)
To
Do this
Skip albums
Push in and rotate [once for
– Album selection
each album] the control.
To continuously skip
albums, push in and rotate
(and hold) the control.
(With optional unit)
To
Do this
Skip discs
Push in and rotate [once for
– Disc selection
each disc] the control.
To continuously skip discs,
push in and rotate once and
rotate again within about 1
second (and hold) the
control.
Skip albums
Push in and rotate the
– Album selection
control [hold for a moment]
and release.
To continuously skip
albums, push in and rotate
again (and hold) within
about 1 second of first
releasing the control.
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
To increase
To decrease
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for 2 seconds while
pushing the VOL control.
Tip
You can also change the operative direction of these
controls with the unit (page 22).
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader,
and subwoofer volume.
1
Press (SOUND) repeatedly to select
the desired item.
Each time you press (SOUND), the item
changes as follows:
BASS (bass) t TREBLE (treble) t
BALANCE (left-right) t FADER (front-
rear) t
SUB (subwoofer volume)
2
Adjust the level of a selected item by
pressing < or ,.
After 3 seconds, the display returns to the
normal play mode.
Note
Adjust within 3 seconds after selecting the item.
Tips
• When adjusting with the unit, press (SOUND)
repeatedly and then rotate the volume control dial.
• When adjusting with the rotary commander, press
(SOUND) repeatedly and then rotate the VOL
control.

Changing the BBE MP setting

The BBE MP process effectively adds warmth
and provides clear CD quality sound even from
heavily compressed MP3 material.
During playback on this unit, press
(5) (BBE MP) to select "BBE MP-on."
To cancel the BBE MP, select "BBE MP-off."
Note
The BBE MP function is available only when playing
back on this unit (when playing back on the optional
unit, BBE MP is not available).
Tip
You can change the BBE MP setting only when
playing back on this unit.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents