Adjusting The Sound Characteristics; Muting The Soutnd; Changing The Sound And Beep Tone - Sony XR-C450 Operating Instructions Manual

Erasing the station name
1 Tune in any station and press for
two seconds.
2 Press G) while pressing GEL).
4 Press for two seconds.
The name is erased.
Repeat steps 3 and 4 if you want to erase
other names.
1 Select the item you want to adjust by
pressing repeatedly.
VOL (volume) — BAS (bass) — TRE
(treble) —» BAL (balance) —+ FAD (fader)
5 Press FILE) for two seconds. 2 Adjust the selected item by pressing
The unit returns to the normal radio either G) or ).
reception mode.
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as the volume control button.)
Muting the sound
Press (MUTE).
The "MUTE" indication flashes.
To restore the previous volume level, press
again.
Changing the sound and
beep tone
Boosting the bass sound — D-bass
You can enjoy clear and powerful bass sound.
The D-bass function boosts the low frequency
signal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal sound is the same volume. You can
emphasize and adjust the bass sound easily
with the D-bass control. This effect is similar to
the one you get when you use an optional
subwoofer system.
Moreover, the Digital D-bass* function creates
even sharper and more powerful bass sound
than Analog D-bass.
continue to next page —
suolpuN,4 JaUIO/OIpeY B