Table of Contents
Advertisement
• Tune in stations automatically. Rotate and
hold the control to tune in the specific
station.
By rotating the control while
pushing in (the PRESET/DISC
control)
Push in and rotate the control to:
• Receive the stations memorized on the
preset buttons.
• Change the disc.
Other operations
Rotate the VOL control to
adjust the volume.
EN
Press (LIST) to display
memorized names.
Changing the operative direction
The operative direction of controls is factory
preset as in the illustration below.
To increase
If you need to mount the rotary commander on
the right of the steering column, you can
reverse the operative direction of the controls.
10
Press (MUTE) to
mute the sound.
Press (OFF) to
turn off the
unit.
Press (SOUND) to
adjust the volume
and sound menu.
To decrease
Press (SOUND) two seconds while pusing
the VOL control.
Tip
You can change the operative direction of controls with the
unit, refer to "Changing the sound and display settings"
(page 11).
Adjusting the sound
characteristics
You can adjust the subwoofer volume, bass,
treble, balance and fader.
Each source can store the sub output, bass and
treble level respectively.
1
Select the item you want to adjust by
pressing (SOUND) repeatedly.
VOL (volume) n SUB (subwoofer volume) n
BAS (bass) n TRE (treble) n BAL (left-right)
n FAD (front-rear)
2
Adjust the selected item by rotating the
dial.
Adjust within three seconds after selection.
(After three seconds, the dial works as the
volume control dial.)
Muting the sound
The unit decreases the volume automatically
when a telephone call is received (Telephone-
mute function).
Advertisement
Table of Contents
