Advanced Functions; 1 Day At Home; 1 Day Away From Home; Ventilation Boost - Vaillant MultiMatic 700/2 Product Training

multiMATIC 700/2

4.4.1.4 Advanced functions

Please note that only one advanced function can be used at a time.

1 day at home

The function should be enabled if the user spends a day at home outside the usual
sequence. The following changes are made:
The function activates "Automatic mode" for one day with the settings for "Sunday",

as set using the "Time programmes" function.
The desired temperature can be changed using the rotary knob. This change will be

applied permanently as the "Desired day temperature".
The function is automatically deactivated at midnight or cancelled beforehand by

the user. The heating installation will then go back to working in the operating mode
that was previously set.
The "1 day at home" function can be activated from any operating mode.


1 day away from home

This function is useful if the user is not at home for a day. The time periods do not
need to be changed, e.g. increasing the target room temperature over the day. This
function makes the system exit the active operating mode as follows:
The target room temperature is set to the "Set-back temperature" and then adjusted

accordingly.
The temperature can be changed using the rotary knob. This change will be applied

permanently as the "Desired set-back temperature".
Hot water generation and the circulation pump are switched off and frost protection

is activated.
The function is automatically deactivated at midnight or may be cancelled by the

user.
The "1 day away from home" function can be activated from any operating mode.


Ventilation boost

Switches off the zones(s) for ventilating the living rooms. When the "ventilation boost"
function is activated:
Notes
10/2015 46 Training 0020228700_00