Connecting The 42Ef To The Io-Link Master - Allen-Bradley RightSight 42EF Series User Manual

Connecting the 42EF to the IO-Link Master

32
Connecting the 42EF to the 
IO-Link Master
Once the IODD file is registered, the sensor must be connected to the 
IO-Link master. The controller must always be off line to add a device to the IO-
Link Master.
1. Right-click the channel number where the sensor is configured and click
"Change."
2. Click on ... to select the appropriate sensor.
Rockwell Automation Publication 42EF-UM001A-EN-P - September 2015
8
Chapter