To ARC TV
a
IN(ARC)
a HDMI cable
Contents
Connections
≫
If the TV supports the ARC (Audio Return Channel) function (*), use only the
HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the
TV for connection.
• Another TV or projector can be connected to the HDMI OUT SUB jack. Switch
between MAIN and SUB using the HDMI Main/Sub button (
remote controller or "Quick Menu" (
compatible.
• If devices with different resolutions are connected to HDMI OUT MAIN jack
and SUB jack, images are output with the lower resolution.
Setup
• Settings are required to use the ARC function. Select "Yes" for "5. ARC Setup"
in Initial Setup (
Setup menu after Initial Setup is completed. Press
and select "6. Hardware" - "HDMI" (
– Set "HDMI CEC" to "On".
– Set "Audio Return Channel" to "Auto".
• For detailed settings for TV connection, CEC function and audio output, refer
to the instruction manual of the TV.
(*) ARC function: This function transmits the audio signals of the TV via an
HDMI cable, and plays the audio of the TV on this unit. Connection to an ARC-
compatible TV is complete with one HDMI cable. To check if the TV supports the
TV
ARC function, refer to the instruction manual of the TV, etc.
35
Playback
≫
p129). Note that this jack is not ARC-
p132). If "No, Skip" is selected, settings are required in the
p116) to make the following settings.
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫
≫
p15) on the
on the remote controller,