Integra DRX-2.3 Instruction Manual page 118

Setting Item Default Value Setting Details
Proxy Port 8080 Displays/Sets the proxy server port number when
you input "Proxy URL".
Friendly Name Integra DRX-2.3 Change the model name of this unit which is
XXXXXX displayed on the device connected to the network
to an easily recognized name.
1. Press Enter to display the Edit screen.
2. Select a character or symbol with the cursors,
3. After inputting, select "OK" with the cursors, and
Contents
and press Enter.
Repeat this operation to input up to 31 characters.
"A/a": Switches between upper and lower cases.
(Pressing Mode on the remote controller also
toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.
" ": Removes a character on the left of the cursor.
" ": Enters a space.
• Pressing Clear on the remote controller will
remove all the input characters.
press Enter.
The input name will be saved.
Connections
≫
Setting Item Default Value
AirPlay Password
Usage Data No
Network Check -
• Wait for a while if "Network" cannot be selected. It can be selected when the network
function is activated.
118
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
You can set a password of up to 31 digits so that
only registered users can use AirPlay .
®
1. Press Enter to display the Edit screen.
2. Select a character or symbol with the cursors,
and press Enter.
Repeat this operation to input up to 31 characters.
"A/a": Switches between upper and lower cases.
(Pressing Mode on the remote controller also
toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.
" ": Removes a character on the left of the cursor.
" ": Enters a space.
• To select whether to mask the password with
"*" or display it in plain text, press Memory on
the remote controller.
• Pressing Clear on the remote controller will
remove all the input characters.
3. After inputting, select "OK" with the cursors, and
press Enter.
The input password will be saved.
To improve the quality of our products and services,
we may collect information about your usage via a
network. Select "Yes" if you agree to our collecting
this information. Select "No" if you do not want us
to collect this information.
• You can set this after confirming the Privacy
Policy. When you select "Usage Data" and press
Enter, the Privacy Policy is displayed.
(The same screen is displayed only once while
setting the network connection.) If you agree to
the collection of the information, this setting also
becomes "Yes". Note that if you select "No" for
this setting after you agree to the Privacy Policy,
the information will not be collected.
You can check the network connection.
Press Enter when "Start" is displayed.
≫