Siemens SITOP Series Function Manual page 59

Function characteristics
Figure 5-24
Input parameters (S7-300/400)
Table 5- 42
Parameter
Execute
UPS8600_No
Cyclic_IO_IN_address
Cyclic_IO_OUT_address
Buffering_In_Param
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
Data type Description
Bool On the rising edge (0 > 1), data at the inputs of
the block is written to the PSU.
Int Number the plugged UPS8600 module.
Word Input address of UPS8600.
Word Output address of UPS8600.
UDT_Data_Buffering UDT for UPS8600 general input parameters.
SIMATIC STEP 7 function blocks
5.12 FB SITOP_UPS8600
59