Siemens SITOP Series Function Manual page 17

Function characteristics
Figure 5-2
Input parameters
Table 5- 2
Parameter
HW_Ident_Head
Cyclic_IO_HeadModule_address
Cyclic_IO_Output1_address
Cyclic_IO_Output2_address
Cyclic_IO_Output3_address
Cyclic_IO_Output4_address
Device_name_PSU8600
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
5.2 FB SITOP_PSU8600/SITOP_PSU8600_1
Data type Description
HW_IO Start address of the entire main module.
(Reference, system tag: here, "PSU_1" refers to
the assigned PROFINET device name of the PSU
main module)
HW_IO Address of the main module IO data submodule.
(Reference, system tag: <PSU Device
Name>~PSU8600_IO_Data_submodule. For ex-
ample: PSU_1~PSU8600_IO_Data_submodule)
HW_IO Start address of main module output 1.
(Reference, system tag: "Output_1". For example:
PSU_1~Output_1)
HW_IO Start address of main module output 2.
(Reference, system tag: "Output_2")
HW_IO Start address of main module output 3.
(Reference, system tag: "Output_3")
HW_IO Start address of main module output 4.
(Reference, system tag: "Output_4")
String Device names of SITOP PSU8600. (String with
maximum of 30 characters. Enter PSU name to be
displayed in the HMI in plain text. For example:
PSU8600)
SIMATIC STEP 7 function blocks
17