Changing The Measurement Display Mode (F1) - Nikon CoolShot Pro Stabilized Instruction Manual

„ Changing the measurement display mode (F1)
„
Switch between four modes (refer to the figure below) according to your golf
En
playstyle. The displayed information differs depending on the mode. Factory
Es
default setting is golf mode.
1. Press the PWR button to turn on the Laser Rangefinder.
Fr
2. Press and hold the MODE button.
De
• You can now change the measurement display mode.
It
3. The setting switches every time you press the PWR button.
Sv
Golf mode: Slope adjusted distance (horizontal distance
± height) and actual distance
Nl
Ru
Incline
Pb
Pl
Decline
Fi
No
Dk
Horizontal distance and height mode
Cz
Incline
Ro
Hu
Decline
• If you press and hold the MODE button or do not operate the buttons for about 8 seconds, the
displayed setting is saved and the Laser Rangefinder returns to standby.
• The setting is saved even when the Laser Rangefinder is turned OFF.
14
Actual
distance
Slope adjusted
distance
(horizontal distance
± height)
Height
Horizontal
distance
N/A Actual distance mode
N/A
Actual distance and height mode
Incline
Decline
Actual
distance
Height
Actual
distance