Northern IP4DIR100 Installation & Quick Setup Manual page 31

IP4DIR100 Series IP Dome Camera · Quick Start Guide
activate the camera, please refer to the User Manual of Network
Camera for other two activation methods.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select the
inactive device.
Note:
The SADP software supports activating the camera in batch. Refer
to the user manual of SADP software for details.
3. Create and input the new password in the password field, and
confirm the password.
Select inactive device.
Figure 3-4
Input and confirm
password.
SADP Interface
30