FLIR E series Getting Started page 16

3 EN-US English
5. On/off button.
Function:
• Push the
• Push and hold the
era in standby mode. The camera then automatically turns off after 6
hours.
• Push and hold the
camera.
6. Back button.
3.10 View from the bottom
See Figure 2.4 View from the bottom, page 3.
1. Latch to open the cover for the battery compartment. Push to open.
3.11 Screen elements
See Figure 2.5 Screen elements, page 4.
1. Measurement tools (e.g., spotmeter).
2. Measurement result table.
3. Status icons and notifications.
4. Temperature scale.
5. Lamp toolbar button.
6. Temperature scale toolbar button.
7. Color toolbar button.
8. Measurement toolbar button.
9. Image modes toolbar button.
10. Recording mode toolbar button.
11. Settings toolbar button.
Note To display the menu system, tap the screen or push the navigation pad.
3.12 To keep in mind
• Adjust the focus first. When the camera is out of focus, the measurement will
be wrong.
#T810135; r. AB/33065/33066; mul
button to turn on the camera.
button for less than 5 seconds to put the cam-
button for more than 10 seconds to turn off the
8