You can adapt the programming of the
hob to your personal needs. Several
settings can be altered in succession.
After accessing programming mode,
(programme) and (code) will appear in
the timer display. On hobs that have 3
cooking zones, an additional display
appears at the back left.
The programme is displayed in the front
left and rear left cooking zone numerical
keybanks.
Example:
Programme 3 =
front left , rear left
Programme 14 =
front left , rear left
The status is displayed on the front
right numerical keybank.
Changing the programming
Accessing programming mode
With the hob switched off press both
the and sensor controls, until
appears in the timer display.
Setting the programme
For a two-digit programme number
you need to first set the tens position.
To set the units, touch the required
number on the front left numerical
keybank.
To set the tens, touch the required
number on the rear left numerical
keybank.
Setting the code
Touch the relevant number on the
front right numerical keybank.
Saving the settings
Touch the sensor control until the
indicators go out.
To avoid saving the settings
Touch the sensor control until the
indicators go out.
Programming
41