Auto heat-up
When Auto heat-up has been activated,
the cooking zone switches on
automatically at the highest setting and
then switches to the continued cooking
setting which you have previously
selected. The heat-up time depends on
which continued cooking setting has
been chosen (see chart).
Activating Auto heat-up
Touch the sensor for the continued
cooking setting you want until a tone
sounds and the sensor starts to flash.
The continued cooking setting will
continue to flash during the heat-up
time (see table).
With extended power levels (see
"Programming") and a selected interim
power level, the sensors for the power
levels in front of and after the interim
power level will pulsate.
Changing the continued cooking
setting while the cooking zone is
heating up deactivates Auto heat-up.
Deactivating Auto heat-up
Touch the sensor for the continued
cooking setting.
or
Set another power level.
Continued
cooking setting*
1
1.
2
2.
3
3.
4
4.
5
5.
6
6.
7
7.
8
8.
9
* The continued cooking settings with a dot
after the number are only available if the
power level range has been extended (see
"Programming"). As the higher continued
cooking settings are generally used for
frying food, only a relatively short heat-up
time is needed to heat up the pan initially.
Operation
Heat-up time
[min : sec]
1:20
2:00
2:45
3:25
4:05
4:45
5:30
6:10
6:50
7:10
1:20
2:00
2:45
2:45
2:45
2:45
–
31