Martin ELP CL User Manual page 28

Personality Cool mode
(continued)
Display
Default Set Fac Default
Fixture test Test LEDs
Information Power On
LED Hours
SW Version
28
Reg fan
Full
Low
Sleep On
2 min
5 min
10 min
Rotation
Normal
Rotate 180
Intensity 10-100
Temp Unit
°C
°F
No
Yes
0 - XXXX h
0 - XXXX h
XX.XX.XX
Martin ELP CL Profile user guide
Fan optimized for light
intensity (temperature
controlled by regulating
fan speed, light output
unaffected)
Fans set to full/low,
constant speed, fixture
temperature
controlled by regulating
light output.
Display remains
permanently on
Display goes into sleep
mode 2 minutes after last
key press
Display goes into sleep
mode 5 minutes after last
key press
Display goes into sleep
mode 10 minutes after last
key press
Display orientation normal
Display orientation rotated
180°
Set display intensity in %
(default = 100)
All temperature readouts in
C°
All temperature readouts in
F°
Return all settings to
factory defaults
Run test sequence of LEDs
(Red, Green, Blue, Lime,
Amber in each order),
Dimmer and Strobe effect.
Press Enter to restart test
sequence. Press Menu
button to exit test.
Hours fixture has been
powered on since
manufacture (not user-
resettable)
Number of hours fixture
LEDs have been powered
on since manufacture (not
user-resettable)
Displays currently active
software version