Use Of Gobos And Irises - Martin ELP CL User Manual

Led profile
Table of Contents

Advertisement

Use of gobos and irises

The fixture will accept an A-size or B-size goboholder or an iris (items not included) in the
gobo/accessory gate. There is a sliding cover over the gate to prevent light spill and retain the
gobo holder in the fixture. To install a goboholder or iris:
1. Allow the fixture to cool. Loosen the two thumbscrews at the sides of the cover
2. Slide the cover towards the front of the fixture.
3. Slide the goboholder into the accessory gate in the fixture.
4. Slide the cover back so that it holds the goboholder in place and tighten the thumbscrews.
1
3
2
4
22
Martin ELP CL Profile user guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elp cl led profile

Table of Contents