Cisco 6800 Series Quick Start Manual page 3

C I S C O 6 8 0 0 S E R I E S M U L T I P L A T F O R M I P P H O N E
Place a Call with a Headset
1. Plug in a headset.
2. Enter a number using the
keypad.
3. Press Headset
Place a Call with the
Speakerphone
1. Enter a number using the
keypad.
2. Press Speakerphone
Mute Your Audio
1. Press Mute .
2. Press Mute again to turn mute
off.
Listen to Voice Messages
Press Messages
the voice prompts. To check
messages for a specific line, press
the line button first.
Forward All Calls
1. Select the right side softkey
with Dots to locate the Forward
and press this softkey.
2. Dial the number that you want
to forward to followed by "#",
you will hear confirmation tone.
3. When you return, select the
softkey with Dots to locate the
Clr Fwd softkey and press this
softkey to end call forwarding.
CONTACT US: USA +1 (866) 588.5885
Adjust the Volume in a Call
Press Volume
down to adjust the handset, headset,
or speakerphone volume when the
phone is in use.
.
Adjust the Ringtone Volume
Press Volume
down to adjust the ringer volume
when the phone is not in use.
.
Change Ringtone
1. Press Menu
2. Select User Preferences.
3. Select Audio Preferences.
4. Select Extension(line key).
Use Navigation Cluster right
5.
arrow to go to the list of
ringtones and press Play to
and follow
hear a sample.
6. After choosing your ringtone
using the "select" softkey and
then hit the Set softkey to save
the new ringtone.
Adjust the Screen Contrast
1. Press Menu
2. Select User Preferences.
3. Select Screen Preferences
4. Select Contrast Level using
Navigation Cluster.
5. Press the Navigation Cluster
right to decrease, left to
increase, the contrast level.
6. Press Save
| UK +44 (0) 207 173 6900
For further information on other
Masergy supported telephones
up or
please visit the Masergy
webpage.
up or
.
.
| sales@masergy.com
IP Phones