Maintenance; Cleaning; Spare And Wearing Parts; Disposal - Bosch BAT 430 Original Instructions Manual

5.

Maintenance

!
Work on electrical equipment is only to be per-
formed by persons with sufficient knowledge and
experience of electrical systems!
5.1

Cleaning

!
Do not use abrasive cleaning agents and coarse
workshop cloths!
¶
The housing and the LCD are only to be cleaned us-
ing a soft cloth and neutral cleaning agents.
5.2

Spare and wearing parts

Description
Charging lead with PVC-insulation
Mains connecting cable 2,5 m
Wearing parts
<)
5.�

Disposal

�he B�� 4�� is subject to the European
directive 2��2/96/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
¶
Make use of the local return and collection
systems for disposal.
¶
Proper disposal of the BAT 430 prevents
environmental pollution and possible
health hazards.
Robert Bosch GmbH
Order number
1 684 460 275
<)
1 684 461 168
<)
Maintenance | B�� 4�� | 19
6. Technical data
Property
Charging current
Charging lead length
*)
Charging lead cross-section
Power consumption
Weight
Characteristic charging curve
Final charge voltage at setting >
15 °C
Voltage limit for secondary charg-
ing at setting > 15 °C
Final charge voltage at setting <
15 °C
Voltage limit for secondary charg-
ing at setting < 15 °C
Back up
Buffer mode
Function temperature range
Mains voltage / frequency
Mains fuse
Nominal battery voltage
Protection type (DIN 40050)
Class of protection (DIN 40530)
Dimensions (W x H x D)
Work-related
noise emission value (Lpa)
Interference emission level
The charging leads may not be changed!
*)
en
Value, Range
Maximal 30 A
2 m
6 mm
2
900 W
5 kg
IUIaIaI
14,0 V / 28,0 V
14,4 V / 28,8 V
14,4 V / 28,8 V
14,8 V / 29,6 V
12,0 V / 24,0 V maximal 2 A
13,5 V / 27,0 V maximal 30 A
0 °C bis 40 °C
230 V, 50/60 Hz
H 250 T 6,3 A
12 V / 24 V
IP 20
II
260 x 160 x 250 mm
≤ 70 dB(A)
DIN 40839 Interference
emission level I
|
1 689 979 996 2012-10-24