Coolant Level Adjustment; Coolant Change - Triumph Bonneville T100 2018 Owner's Handbook Manual

Coolant Level Adjustment

Warning
Do not remove the expansion tank or
radiator pressure cap when the engine
is hot.
When the engine is hot, the coolant
inside the radiator will be hot and also
under pressure.
Contact with this hot, pressurized
coolant will cause scalds and skin
damage.
If hard water
cooling system, it will cause scale
accumulation in
radiator and considerably reduce the
efficiency of the cooling system.
Reduced cooling system efficiency
may cause the engine to overheat and
suffer severe damage.
Note
If the coolant level is being checked
because the coolant has overheated,
also check the level in the radiator and
top off if necessary.
In an emergency, distilled water can be
added to the cooling system. However,
the coolant must then be drained and
replenished with HD4X Hybrid OAT
coolant as soon as possible.
Caution
is used in
the engine
Maintenance and Adjustment
Bonneville T100, Bonneville T120,
Bonneville T120 Ace,
Bonneville T120 Diamond,
Street Scrambler and Street Twin
To adjust the coolant level:
• Allow the engine to cool.
• The expansion tank cap can be
removed from the left hand side of
the motorcycle, towards the rear of
the engine.
• Remove the cap from the expansion
tank
through the filler opening until
the level reaches the MAX mark.
Reinstall the cap.
Speed Twin, Thruxton and
the
Thruxton R
and
To adjust the coolant level:
• The expansion tank cap can be
removed from the right hand side of
the motorcycle, towards the rear of
the engine.
• Remove the sprocket cover.
• Remove the cap from the expansion
tank
through the filler opening until the
level reaches the maximum (top)
mark.
• Reinstall the cap. Re-install the
sprocket cover to 80 lbf in (9 Nm).

Coolant Change

It is recommended that the coolant
is changed by an authorized Triumph
dealer in accordance with scheduled
maintenance requirements.
and add coolant
and add coolant
mixture
mixture
109