Tire Pressure Monitoring System (Tpms) (If Equipped); Tire Wear - Triumph Bonneville T100 2018 Owner's Handbook Manual

Maintenance and Adjustment
Tire Pressure Monitoring System
(TPMS) (if equipped)
An adhesive label is installed to the
wheel rim to indicate the position of
the tire pressure sensor.
Care must be taken when replacing
the tires to prevent any damage to
the tire pressure sensors.
Always have your
by your authorized Triumph dealer
and inform them that tire pressure
sensors are installed on the wheels.
Do not use anti puncture fluid or any
other item likely to obstruct air flow
to the TPMS sensor's orifices. Any
blockage to the air pressure orifice of
the TPMS sensor during operation will
cause the sensor to become blocked,
causing irreparable damage to the
TPMS sensor assembly.
Damage caused
anti puncture
maintenance is
manufacturing defect and will not be
covered under warranty.
Always have your
by your authorized Triumph dealer
and inform them that tire pressure
sensors are installed on the wheels.
134
Caution
tires mounted
Caution
by the use
fluid or incorrect
not considered
tires mounted
The tire pressures shown on your
instruments indicate the actual tire
pressure at the time of selecting
the display. This may differ from the
inflation pressure set when the tires
are cold because tires become warmer
during riding, causing the air in the tire
to expand and increase the inflation
pressure. The cold inflation pressures
specified by Triumph take account of
this.
Only adjust
the tires are cold using an accurate
pressure gage. Do not use the tire
pressure display on the instruments.

Tire Wear

As the tire tread wears down, the tire
becomes more susceptible to punctures
and failure. It is estimated that 90%
of all tire problems occur during the
last 10% of tread life (90% worn). It is
recommended that tires are changed
before they are worn to their minimum
tread depth.
of
a
tire pressures when