Mounting
8.14 Mounting 90 mm devices with device connectors on the wall
Procedure
Step
Instructions
1
Push the device connectors
together until they engage
2
Mount the cover on the left of
the first device connector
3
Note the clearances required
for the 90 mm devices
Mount the device connector
supplied in the set for
enclosures of 45 mm upwards
(right-hand side)
Tightening torques:
Top: < 0.1 Nm
•
Bottom: 1 Nm
•
152
Figure
click
click
Manual, 04/2013, A5E02526190021A/RS-AA/01
3SK1 safety relays