Paint Menu List - Sony PDW-510P Operation Manual

PAINT Menu List

The following table lists and describes the items in the
PAINT menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
No. Page
01 SW STATUS
02 WHITE
03 BLACK/FLARE
188
Menu List
Item Settings
GAMMA OFF/ON
CHROMA OFF/ON
MATRIX OFF/ON
KNEE OFF/ON
WHITE CLIP OFF/ON
DETAIL OFF/ON
APERTURE OFF/ON
FLARE ON/OFF
EVS OFF/ON
TEST SAW OFF/REC/SAW
COLOR TEMP <A> Display color
temperature
COLOR FINE <A> (–99 to +99)
R GAIN <A> (–99 to +99)
B GAIN <A> (–99 to +99)
D5600K <A> OFF/ON
COLOR TEMP <B> Display color
temperature
COLOR FINE <B> (–99 to +99)
R GAIN <B> (–99 to +99)
B GAIN <B> (–99 to +99)
D5600K <B> OFF/ON
MASTER BLACK (–99 to +99)
R BLACK (–99 to +99)
B BLACK (–99 to +99)
MASTER FLARE (–99 to +99)
R FLARE (–99 to +99)
G FLARE (–99 to +99)
B FLARE (–99 to +99)
FLARE OFF/ON
TEST OUT SELECT ENC/R/G/B
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
Default Description
ON Turns the gamma correction on or off.
ON Turns the chroma of the composite signal on
or off.
ON Turns the linear matrix correction on or off.
ON Turns the knee correction on or off.
ON Turns the white clipping correction on or off.
ON Turns the detail signal on or off.
ON Turns the aperture function on or off.
ON Turns the flare function on or off.
OFF Turns the EVS shutter on or off.
OFF Selects the test signal.
3200 Sets the color temperature of WHITE A.
0 Adjusts the value more precisely when the
color temperature adjustment through
COLOR TEMP is not satisfactory.
0 Only the value of R GAIN is changed.
0 Only the value of B GAIN is changed.
OFF Turns the WHITE A electronic 5600K filter on
or off.
3200 Sets the color temperature of WHITE B.
0 Adjusts the value more precisely when the
color temperature adjustment through
COLOR TEMP is not satisfactory.
0 Only the value of R GAIN is changed.
0 Only the value of B GAIN is changed.
OFF Turns the WHITE B electronic 5600K filter on
or off.
0 Adjusts the master black level.
0 Adjusts the R black level.
0 Adjusts the B black level.
0 Adjusts the flare level of the master.
0 Adjusts the R flare level.
0 Adjusts the G flare level.
0 Adjusts the B flare level.
ON Turns the flare correction circuit on or off.
ENC Selects the output signal of TEST OUT
connector.