Sony PDW-510P Operation Manual page 189

No. Page Item
04 GAMMA GAMMA
STEP GAMMA
MASTER GAMMA
R GAMMA
G GAMMA
B GAMMA
TEST OUT SELECT
GAMMA SELECT
GAMMA SEL (STD)
GAMMA SEL (FILM)
05 BLACK GAMMA BLACK GAMMA
BLACK GAM RANGE
MASTER BLK
GAMMA
R BLACK GAMMA
G BLACK GAMMA
B BLACK GAMMA
TEST OUT SELECT
06 KNEE KNEE
KNEE POINT
KNEE SLOPE
KNEE SATURATION
KNEE SAT LEVEL
WHITE CLIP
WHITE CLIP LEVEL
07 DETAIL 1 DETAIL
APERTURE
DETAIL LEVEL
APERTURE LEVEL
DTL H/V RATIO
CRISPENING
LEVEL DEPEND
LEVEL DEPEND LVL
DETAIL FREQUENCY (–99 to +99)
Settings Default Description
OFF/ON ON Turns the gamma correction function on or
off.
0.35 to 0.90 0.45 Sets the master gamma correction curve in
steps.
(–99 to +99) 0 Sets the master gamma correction curve.
(–99 to +99) 0 Sets the R gamma correction curve.
(–99 to +99) 0 Sets the G gamma correction curve.
(–99 to +99) 0 Sets the B gamma correction curve.
ENC/R/G/B ENC Selects the output signal of TEST OUT
connector.
STD/FILM STD Selects the gamma table.
1 to 6 3 Selects the gamma table of STD.
1 to 5 1 Selects the gamma table of FILM.
OFF/ON OFF Turns the black gamma correction on or off.
LOW/L.MID/ HIGH Sets the range affected by black gamma.
H.MID/HIGH
(–99 to +99) 0 Adjusts the master black gamma.
(–99 to +99) 0 Sets the correction curve of the R black
gamma.
(–99 to +99) 0 Sets the correction curve of the G black
gamma.
(–99 to +99) 0 Sets the correction curve of the B black
gamma.
ENC/R/G/B ENC Selects the output signal of TEST OUT
connector.
OFF/ON ON Turns the knee correction circuit on or off.
50 to 109% 85.0 Sets the knee point level.
(–99 to +99) 0 Set the knee slope level.
OFF/ON ON Turns the knee saturation function on or off.
(–99 to +99) 0 Sets the knee saturation level.
OFF/ON ON Turns the white clipping function on or off.
100.0 to 109.5% 109.0 Adjusts the white clipping level.
OFF/ON ON Sets the detail correction function on or off.
OFF/ON ON Turns the aperture correction function on or
off.
(–99 to +99) 0 Sets the general level of the detail signal.
(–99 to +99) 0 Sets the aperture level.
(–99 to +99) 0 Sets the level of the V detail signal.
(–99 to +99) 0 Sets the crispening level.
OFF/ON ON Turns the level depend function on or off.
(–99 to +99) 0 Sets the level of the level depend.
0 Sets the frequency of the H detail signal.
189
Menu List