Sony PDW-510P Operation Manual page 108

Command name
TYPE
STRU
MODE
LIST
108
6-3 FTP File Operations
Description
Specifies the type of data to be
transferred.
Specifies the data structure.
Specifies the transfer mode.
Sends a list of files from this unit to the
remote computer.
Command syntax
TYPE <SP> <type-code (options delimited by <SP>)>
<CRLF>
<type-code> can be any of the following. However, for
XDCAM, data is always transferred as "I," regardless of the
type-code specification.
• A: ASCII
- N: Non-print
- T: Telnet format
- C: ASA Carriage Control
• E: EBCDIC
- N: Non-print
- T: Telnet format
- C: ASA Carriage Control
• I: IMAGE (Binary) (default)
• L: LOCAL BYTE
- SIZE: byte size
Input example: TYPE I
STRU <SP> <structure-code> <CRLF>
<structure-code> can be any of the following. However, for
XDCAM, the structure is always "F," regardless of the
structure-code specification.
• F: File structure (default)
• R: Record structure
• P: Page structure
Input example: STRU F
MODE <SP> <mode-code> <CRLF>
<mode-code> can be any of the following. However, for
XDCAM, the mode is always "S," regardless of the mode-
code specification.
• S: Stream mode (default)
• B: Block mode
• C: Compressed mode
Input example: MODE S
LIST <SP> <options> <SP> <path-name> <CRLF>
<options> can be any of the following.
• -a: Also display file names that begin with "."
• -F: Append "/" to directory names.
The following data is transferred, depending on whether
<path-name> specifies a directory or file.
• Directory specified: A list of the files in the specified
directory
• File specified: Information about the specified file
• No specification: A list of the files in the current directory.
The wildcard characters "*" (any string) and "?" (any
character) may be used in <path-name>.
Input example 1: LIST -a Clip
Input example 2: LIST Clip/*.MXF