Sony PDW-510P Operation Manual page 63

a)
Name of currently selected clip
Thumbnail of currently selected clip
(first frame or specified
Recording date and time
of selected clip
a) When a title has been assigned to a clip (see page 52), the
title is enclosed in double quotation marks, for example
"TITLE00001".
b) The thumbnail frame can be specified by a menu selection
when the clip is recorded (see page 99).
To switch between duration and timecode display
in the thumbnail display
Press the HOLD button. Each press of the HOLD
button switches the display between duration ant time
code.
To escape from the thumbnail display to the full-
screen display
Press the THUMBNAIL button, turning off the
indicator.
2
Turn the SEL/SET dial or the MENU knob to select
the desired clip.
You can also select clips with the following
operations.
Press the PREV or NEXT button: Select the
previous or next clip.
Press the PREV or NEXT button with the F REV
or F FWD button held down: Select the first or
last clip.
3
To cue up the selected clip, press the SEL/SET dial or
the MENU knob.
To start playback from the selected clip, press the
PLAY/PAUSE button.
Sixth clip is selected from
a total of 143 clips.
b)
frame)
Duration of selected clip or
time code of first frame
Cuing up a frame including an essence
mark
Proceed as follows.
2~5
1
THUMBNAIL
ESSENCE MARK
SUB CLIP
CLIP MENU
PRESET F-RUN
REGEN REGEN
CLOCK CLOCK R-RUN
5
4,5
1
Hold down the SHIFT button, and press the
THUMBNAIL button.
The essence mark selection screen appears.
Notes
• If the MENU ON/OFF switch is set to ON, set it to
OFF and press the THUMBNAIL button.
• If you set the MENU ON/OFF to ON during
thumbnail display, thumbnail display is cancelled
and replaced with menu display.
To escape from the essence mark selection screen to
the previous screen
Press the RESET button.
2
Turn the SEL/SET dial or the MENU knob to select
the desired essence mark.
3-3 Checking Recording and Playback
SEL/SET
S.SEL
SHIFT
SET
63