The Inmotion Scv Cannot Power Off; The Inmotion Scv Cannot Be Added In The App - InMotion R2 Manual

 Step on the Footboard Mat and stand still. If the INMOTION SCV turns to one side automatically, activate
Self-check Mode.
 Check the Tires and make sure they are not worn. If the Tires appear to be in good condition, activate Self-check
Mode.
 Use your INMOTION SCV Smartphone App to adjust steering sensitivity.

7.6. The INMOTION SCV Cannot Power Off

Recommended Action:
 Check the Footboard Mat to make sure there is nothing on it and that it is not stuck.
 If the INMOTION SCV still cannot power off, turn it upside down (the Handlebar should be pitched at an angle of
30° ).The Wheels will be rolling and you can now safely power it off.
 If the INMOTION SCV still cannot power off, remove the Battery Pack and then reinsert it.
 Press and hold the Power button on the Smart Key for two seconds to restart the INMOTION SCV.

7.7. The INMOTION SCV Cannot Be Added in the App

Recommended Action:

Make sure the INMOTION SCV is not powered off. If it is powered off, restart it.
 Wi-Fi system needs 1~2 minutes to initialize.
 If the INMOTION SCV is set to use a Dynamic IP Address, please be aware that it may take 1~2 minutes to get
the IP address. (Make sure you are connected to a DHCP server that can effectively distribute IP addresses.)
 The INMOTION SCV will activate AP mode automatically if you have not set up a Wi-Fi AP list before.
61 / 64