Table of Contents
Advertisement
Continuing toaccelerate and rideagainst the Handlebar could cause injury or damage from loss of control, collisions, and
falls.
The speed at which the handlebar pushes back depends on a variety of factors including set-up speed limiter, terrain,
Continuous climbing
Riding on bumpy roads
The moment it powers on
Low battery
payload, and battery condition. The below list shows conditions that will trigger the speed limiter.
3.1.1
Safe Stop
If the INMOTION SCV detects severe faults or restrictions (such as
being outside the specified riding range), it performs a Safety Shutdown.
When a Safety Shutdown occurs, the INMOTION SCV automatically
reduces its speed, gives the Shaft Shake Warning (shakes the handlebar and
makes growling noises), and emits a warning tone.
You have approximately 14 seconds from the start of a Safety Shutdown
to come to a controlled stop and step off. After 14 seconds, the INMOTION
SCV will immediately shut down when the Wheels reach zero speed.
Motor temperature
High Circuit temperature
Battery temperature too high or too low
Continuous descending
41 / 64
Advertisement
Table of Contents
