Working Mode; Introduction - InMotion R2 Manual

2.8. Working Mode

2.7.3

Introduction

INMOTION SCV has more than 10 working modes, here we list out important modes.
Working Mode
Standby
Balance
Auto Balance
Excessive Angle
Self-check
Error
The INMOTION SCV is in Standby Mode by default. Most of the other modes will be started from
Standby Mode.
INMOTION SCV has detected a rider and the footboard angle is moderate. Training Mode and Speed
Mode can be activated from Balance Mode. Read following sections for more information.
When a rider steps onto the INMOTION SCV and the footboard angle is moderate (between2°and 15°),
the system will start to level the footboard. In the meantime, the INMOTION SCV may travel a short
distance either backward or forward in order to balance itself. An excessive or too small angle will
trigger an error warning.
When a rider steps onto the INMOTION SCV and the footboard angle is too big, the INMOTION SCV
will vibrate to warn the rider to slowly level the footboard.
The INMOTION SCV will examine and calibrate itself in Self-check Mode. INMOTION SCV can
enter Self-check mode by mobile app. Read Section 3.6 for more information.
If the INMOTION SCV detects an error or a system fault during normal riding conditions it will
automatically reduce the speed and slowly stop. The Tires will be locked if it needs extra assistance to
solve the problem. Once the Tires are locked, please contact your local distributor for maintenance
service.
Description
20 / 64