Table of Contents
Advertisement
Only charge the Battery Pack using approved charging adapters.
Use a grounded AC outlet and a charging cord that is in compliance with local standards.
Keep the Charger, Charge Port, Power Cord and AC outlet clean and dry.
Do not insert the plug if the Charge Port, Power Cord or AC Power outlet is wet.
Do not heat up the Battery Pack or throw it into a fire. Do not use the Battery Pack in high temperatures.
Keep the Battery Pack in a cool, dry place when storing.
Do not put any conductive object into the Charge Port. It may damage electronic devices inside the INMOTION
SCV.
Do not attempt to open the Battery Pack. There are no user serviceable parts inside.
4.3. Charging Procedures
To charge the Battery Pack:
1. Open the Charge Port of your INMOTION SCV. Verify that
the Charge Port is dry.
2. Plug one end of the Power Cord into the Charge Port of your
INMOTION SCV with the INMOTION LOGO on the charger
facing up. Plug the other end of the Power Cord into an AC outlet
(100 V~ 240 V; 50 Hz or 60 Hz).
3. Verify that the Charge Indicator lights are red, which
indicates the INMOTION SCV is charging. When charging
completes (indicator lights turn green), unplug the charger from the
electrical outlet.
47 / 64
Advertisement
Table of Contents
