Declaration Of Conformity - R82 Panda Futura Manual

The latest version of the User Guide is always available on-
line: www.R82.org

Declaration of Conformity

This product conforms to the requirements of the Medical
Devices Directive (93/42/EEC). The CE mark must be re-
moved when rebuilding the product, when used in combina-
tion with a product from another manufacturer or when us-
ing other than original R82 spare parts and fittings. Further,
this product conforms to the requirements according to:
EN 12182
•
EN 12183
•
Enclosed tool:
5 mm Allen key
R82 Warranty
R82 offers a 2-year warranty against defects in workmanship
and materials and a 5-year warranty on breakage of the metal
frame caused by defects in welds. The warranty would be ad-
versely affected if the customer's responsibility of servicing
and/or maintenance is not carried out according to the guide-
lines and intervals prescribed by the supplier and/or stated in
the User Guide. For further information, we refer to the R82
homepage/download.
The warranty is only granted in the country where the product
was purchased and if the product can be identified by the se-
rial number. The warranty does not cover accidental damage,
including damage caused by misuse or neglect. The warranty
does not extend to consumable items e.g. tires or upholstery,
which are subject to normal wear and tear and need periodic
replacement.
The warranty is null and void if other than original parts/ac-
cessories are used, or if the product has not been maintained,
E
repaired or altered according to the guidelines and intervals
N
prescribed by the supplier and/or stated in the User Guide.
R82 reserves the right to inspect the product being claimed
for and the relevant documentation before agreeing to the war-
ranty claim, and to decide upon whether to replace or repair the
defective product. It is the customer's responsibility to return
the item being claimed for under warranty to the address of
purchase.
Safety
Signs, symbols and instructions placed on this product must
never be covered or removed and must remain present and
clearly legible throughout the entire lifetime of the product.
Immediately replace or repair illegible or damaged signs,
symbols and instructions. Contact your local dealer for in-
structions.
Caregiver
• Read the "User Guide" carefully before use and keep it
for future reference. Incorrect use of this product may
cause serious injury to the user
• Always use the correct lifting techniques and aids for
this purpose
• Never leave the user unattended in this product. En-
sure permanent supervision by an adult
• Repair/replacements must only be made using new
original R82 spare parts and fittings and carried out in
accordance with the guidelines and service intervals
prescribed by the supplier
• If there is any doubt as to the continued safe use of your
R82 product or if any parts should fail, stop using the
product immediately and contact your local dealer as
soon as possible
• Information regarding frame and seat combinations in-
cluding max. load in combination can be found at: sup-
port.r82.org
• Information about transportation can be found in the
document "Transportation in Motor Vehicles" supplied
with the product
Environment
• Observe the surface temperature on the product, be-
fore placing an user in it. This goes especially for users
with insensitive skin as they can not feel the heat. If
the surface temperature is above 41°C then allow the
product to cool before use
User
• If the user is close to the max. load limit and/or has
a lot of involuntary movements, e.g. rocking, a larger
size with a higher max. load or a different R82 product
should be considered
• For transportation the product is suitable for children in
the weight range of 22 kg to specified max user weight
for transportation.
Product
• Carry out all positional adjustments on the product and
accessories and ensure that all knobs, screws and
buckles are securely fastened before use. Keep all
tools out of the reach of children
• Ensure the stability of the product is maintained before
placing the user in it
• Inspect the product and all of its accessories and re-
place any worn out parts before use
• Do not expose the piston rod to scratches etc. It is im-
portant to use a cloth or the like, if tools are used to
adjust the gas spring
• This product is tested for resistance to ignition at level
non-ignition in accordance with EN 1021-1, EN 1021-2
and ISO 7176-16
• The product might lose its flame resistant characteris-
tics if using other than original R82 cushions.
Disposal
When a product reaches the end of its lifetime, it should be
separated by material type so that the parts can be recycled
or disposed of properly. If required, please contact your lo-
cal dealer for a precise description of each material. Please
contact your local authorities to be informed of the options
available for recycling in an environmentally-friendly way.
4