Gira 5403 00 Operating Instructions

Relay switching insert

Download this manual

System 3000

Relay switching insert

Order no.: 5403 00

Operating instructions

Safety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the devise or load. In

so doing, take all the circuit breakers into account, which support dangerous voltages to the

device and or load.

These instructions are an integral part of the product, and must remain with the end customer.

Intended use

–

Switching of lighting and motors

–

Operation with suitable cover

–

Mounting in appliance box according to DIN 49073

Operation

These instructions describe operation with a button cover. Operation with a different cover is de-

scribed in the instructions for the cover in question. The operation on the main device and the 2-

wire extension is identical.

Switch load

￭

Press the button.

The load switches on or off.

Information for electrically skilled persons

DANGER!

Mortal danger of electric shock.

Disconnect the device. Cover up live parts.

82597422

06.05.2019

1 / 4

Page 1 System 3000 Relay switching insert Relay switching insert Order no.: 5403 00 Operating instructions Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible. Please read and follow manual fully.
Page 2 System 3000 Relay switching insert Connecting and fitting the device Figure 1: Connection diagram with optional extensions Figure 2: Terminal-specific cable cross-section: ￭ Connect the switch insert (2) according to the connection diagram (Figure 1). Note clamp- able cable cross-sections (Figure 2). ￭...
Page 3 System 3000 Relay switching insert Set run-on time For the automatic switching-off of the load, run-on times can be set, see table. During the run-on time it cannot be restarted by pressing again. ￭ Press the TEST button (1) for more than 4 seconds. LED lights up in the colour of the set run-on time, see table.
Page 4 The warranty is provided in accordance with statutory requirements via the specialist trade. Please submit or send faulty devices postage paid together with an error description to your re- sponsible salesperson (specialist trade/installation company/electrical specialist trade). They will forward the devices to the Gira Service Center. Gira Giersiepen GmbH & Co. KG...